•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Table 6: Setup Wizard for Open-loop Applications
Parameter
Option
Default
Usage
Parameter 0-03
Regional Set-
tings
[0] International
[1] US
[0] Interna-
tional
–
Parameter 0-06
GridType
[10] 380–440 V/50 Hz/IT-grid
[11] 380–440 V/50 Hz/Delta
[12] 380–440 V/50 Hz
[20] 440–480 V/50 Hz/IT-grid
[21] 440–480 V/50 Hz/Delta
[22] 440–480 V/50 Hz
[110] 380–440 V/60 Hz/IT-grid
[111] 380–440 V/60 Hz/Delta
[112] 380–440 V/60 Hz
[120] 440–480 V/60 Hz/IT-grid
[121] 440–480 V/60 Hz/Delta
[122] 440–480 V/60 Hz
Size related
Select the operating mode for restart after reconnection of
the drive to mains voltage after power down.
N O T I C E
Compared to 380–440 V groups, when selecting 440–
480 V groups, the rated current decreases accordingly.
Parameter 1-10
Motor Con-
struction
*[0] Asynchron
[1] PM, non-salient SPM
[3] PM, salient IPM
[0] Asynchron
Setting the parameter value might change these parame-
ters:
Parameter 1-01 Motor Control Principle
.
Parameter 1-03 Torque Characteristics
.
Parameter 1-08 Motor Control Bandwidth
.
Parameter 1-14 Damping Gain
.
Parameter 1-15 Low Speed Filter Time Const
.
Parameter 1-16 High Speed Filter Time Const
.
Parameter 1-17 Voltage Filter Time Const
.
Parameter 1-20 Motor Power
.
Parameter 1-22 Motor Voltage
.
Parameter 1-23 Motor Frequency
.
Parameter 1-24 Motor Current
.
Parameter 1-25 Motor Nominal Speed
.
Parameter 1-26 Motor Cont. Rated Torque
.
Parameter 1-30 Stator Resistance (Rs)
.
Parameter 1-33 Stator Leakage Reactance (X1)
.
Parameter 1-35 Main Reactance (Xh)
.
Parameter 1-37 d-axis Inductance (Ld)
.
Parameter 1-38 q-axis Inductance (Lq)
.
Parameter 1-39 Motor Poles
.
Parameter 1-40 Back EMF at 1000 RPM
.
Parameter 1-44 d-axis Inductance Sat. (LdSat)
.
Parameter 1-45 q-axis Inductance Sat. (LqSat)
.
Parameter 1-46 Position Detection Gain
.
Parameter 1-48 Current at Min Inductance for d-axis
.
Parameter 1-49 Current at Min Inductance for q-axis
.
Parameter 1-66 Min. Current at Low Speed
.
AU363928304090en-000101 / 130R0982 | 13
Danfoss A/S © 2021.07
Programming
VLT® Flow Drive FC 111
Programming Guide
