VLT
®
FCD Series
Programming, FCD
300
Pulse input 29[Hz]
gives the frequency in Hz
connected to terminal 29.
Pulse count
gives the number of pulses that
the unit has registered.
010 Small display line 1.1
(DISPLAY LINE 1.1)
Value:
See par.
009
Large display readout
✭
Analog input 53 [V] [17]
Function:
In this parameter, the first of three data values
can be selected that is to be displayed in the
LCP control unit display, line 1, position 1. This
is a useful function, e.g. when setting the PID
regulator, as it gives a view of process reactions to
reference changes. The display readout is activated
by pushing the [DISPLAY STATUS] key.
Description of choice:
See parameter 009
Large display readout
.
011 Small display readout 1.2
(DISPLAY LINE 1.2)
Value:
See parameter 009
Large display readout
✭
Motor current [A][6]
Function:
See the functional description given under parameter
010
Small display readout
.
Description of choice:
See parameter 009
Large display readout
.
012 Small display readout 1.3
(DISPLAY LINE 1.3)
Value:
See parameter 009
Large display readout
✭
Feedback [unit] [3]
Function:
See the functional description given under parameter
010
Small display readout
.
Description of choice:
See parameter 009
Large display readout
.
013 Local control
(LOC CTRL/CONFIG.)
Value:
Local not active (DISABLE)
[0]
Local control and open loop without slip
compensation
(LOC CTRL/OPEN LOOP)
[1]
Remote-operated control and open loop
without slip compensation
(LOC+DIG CTRL)
[2]
Local control as parameter 100
(LOC CTRL/AS P100)
[3]
✭
Remote-operated control as parameter 100
(LOC+DIG CTRL/AS P100)
[4]
Function:
This is where the required function is selected if,
in parameter 002
Local/remote operation, Local
operation
[1] has been chosen.
Description of choice:
If
Local not active
[0] is selected, it is not possible to
set a reference via parameter 003
Local reference
.
In order to enable a shift to
Local not active
[0], parameter 002
Local/remote operation
must
be set to
Remote operation
[0].
Local control and open loop
[1] is used if the motor
speed is to be set via parameter 003
Local reference
.
When this choice is made, parameter 100
Configuration
automatically shifts to
Speed regulation, open loop
[0].
Remote-operated control and open loop
[2] functions
in the same way as
Local control and open loop
[1]; however, the frequency converter can also
be controlled via the digital inputs.
For selections [1-2] control is shifted to open
loop, no slip compensation.
Local control as parameter 100
[3] is used when
the motor speed is to be set via parameter
003
Local reference
, but without parameter 100
Configuration
automatically shifting to
Speed
regulation, open loop
[0].
Remote-operated control as parameter 100
[4]
works the same way as
Local control as parameter
100
[3]; however, the frequency converter can also
be controlled via the digital inputs.
✭
= factory setting. () = display text [] = value for use in communication via serial communication port
MG.04.B7.02 - VLT is a registered Danfoss trademark
35
