Danfoss FC 300, Руководство по программированию

Страница: 30 / 205

0-13 Readout: Linked Set-ups
Array [5]
0
*
[0 - 255]
View a list of all the set-ups linked by means of par. 0-12
This Set-up Linked to
. The parameter has one index
for each parameter set-up. The parameter value displayed for each index represents which setups are linked to
that parameter setup.
Index LCP value
0 {0}
1 {1,2}
2 {1,2}
3 {3}
4 {4}
Table 2.1: Example: Set-up 1 and Set-up 2 are linked
0-14 Readout: Edit Set-ups / Channe
Range: Function:
0
*
[0 - FFF.FFF.FFF]
View the setting of par. 0-11 Edit Set-up for each of the four different communication channels. When the number
is displayed in hex, as it is in the LCP, each number represents one channel.
Numbers 1-4 represent a set-up number; ‘F’ means factory setting; and ‘A’ means active set-up. The channels
are, from right to left: LCP, FC-bus, USB, HPFB1-5.
Example: The number AAAAAA21h means that the FC bus selected Set-up 2 in par. 0-11, the LCP selected Set-
up 1 and all others used the active set-up.
2.3.4. 0-2* LCP Display
Define the variables displayed in the Graphical Local Control Panel.
NB!
Please refer to parameters 0-37, 0-38 and 0-39 for information on how to write display texts
Select a variable for display in line 1, left position.
[0] None No display value selected.
[953] Profibus Warning Word
[1005] Readout Transmit Error
Counter
[1006] Readout Receive Error
Counter
[1007] Readout Bus Off Coun-
ter
[1013] Warning Parameter
[1501] Running Hours
[1502] kWh Counter
[1600] Control Word Present control word
[1601] Reference [Unit] Total reference (sum of digital/analog/preset/bus/freeze ref./catch up and slow-down) in selected unit.
[1602] Reference % Total reference (sum of digital/analog/preset/bus/freeze ref./catch up and slow-down) in percent.
[1603] Status Word Present status word.
[1605] Main Actual Value [%] One or more warnings in a Hex code.
[1609] Custom Readout
2. How to Programme FC 300 Programming Guide
30
MG.33.M3.02 - VLT ® is a registered Danfoss trademark
2