34-05 PCD 5 Write to
MCO
34-06 PCD 6 Write to
MCO
34-07 PCD 7 Write to
MCO
34-08 PCD 8 Write to
MCO
34-09 PCD 9 Write to
MCO
34-10 PCD 10 Write to
MCO
Select the parameters to be assigned to PCD 3 to 10 of the telegrams. The number of available PCDs depends
on the telegram type. The values in PCD 3 to 10 will then be written to the selected parameters as data values.
Alternatively, specify a standard Profibus telegram in par. 9-22.
9-16 PCD Read Configuration
Array [10]
None
16-00 Control Word
16-01 Reference [Unit]
16-02 Reference %
16-03 Status Word
16-04 Main Actual Val-
ue [Unit]
16-05 Main Actual Val-
ue [%]
16-09 Custom Readout
16-10 Power [kW]
16-11 Power [hp]
16-12 Motor Voltage
16-13 Frequency
16-14 Motor Current
16-16 Torque
16-17 Speed [RPM]
16-18 Motor Thermal
16-19 KTY Sensor
Temperature
16-21 Phase Angle
16-30 DC Link Voltage
16-32 Brake Energy / s
16-33 Brake Energy / 2
min 16-34 Heatsink
Temp.
16-35 Inverter Thermal
16-38 SL Control State
16-39 Control Card
Temp.
16-50 External Refer-
ence
16-51 Pulse Reference
2. How to Programme
FC 300 Programming Guide
112
MG.33.M3.02 - VLT
®
is a registered Danfoss trademark
2
