![background image](http://html1.mh-extra.com/html/danfoss/fc-100-series/fc-100-series_programming-manual_3422924009.webp)
Navigation Keys
The four navigation arrows are used to navigate between the different
choices available in
[Quick Menu]
,
[Main Menu]
and
[Alarm Log]
.
Use the keys to move the cursor.
[OK]
is used for choosing a parameter marked by the cursor and for
enabling the change of a parameter.
Operation Keys
for local control are found at the bottom of the control
panel.
130BP046.10
[Hand On]
enables control of the frequency converter via the GLCP. [Hand on] also starts the motor, and it is now possible to enter the motor speed data by means
of the arrow keys. The key can be selected as
Enable
[1] or
Disable
[0] via par. 0-40
[Hand on] key on LCP.
The following control signals will still be active when [Hand on] is activated:
•
[Hand on] - [Off] - [Auto on]
•
Reset
•
Coasting stop inverse
•
Reversing
•
Set-up select lsb - Set-up select msb
•
Stop command from serial communication
•
Quick stop
•
DC brake
NB!
External stop signals activated by means of control signals or a serial bus will override a “start” command via the LCP.
[Off]
stops the connected motor. The key can be selected as Enable [1] or Disable [0] via par. 0-41
[Off] key on LCP.
If no external stop function is selected
and the [Off] key is inactive the motor can only be stopped by disconnecting the mains supply.
VLT
®
HVAC Drive Programming Guide
2. How to Programme
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
9
2