Danfoss FC 100 Series, Руководство по программированию, Страница: 73 / 284

[2] Drive Ready
[3] Drive Ready/Remote
[4] Stand-by/No Warning
[5]
*
Running (
＊
Relay 2)
[6] Running/No Warning
[8] Run on Ref./No Warn-
ing
[9]
*
Alarm (
＊
Relay 1)
[10] Alarm or Warning
[11] At Torque Limit
[12] Out of Current Range
[13] Below Current, low
[14] Above Current, high
[15] Out of Speed Range
[16] Below Speed, low
[17] Above Speed, high
[18] Out of Feedb. Range
[19] Below Feedback, low
[20] Above Feedback, high
[21] Thermal Warning
[25] Reverse
[26] Bus OK
[27] Torque Limit & Stop
[28] Brake, No Warning
[29] Brake Ready, No Fault
[30] Brake Fault (IGBT)
[35] External Interlock
[36] Control Word Bit 11
[37] Control Word Bit 12
[40] Out of Ref. Range
[41] Below Reference, low
[42] Above Ref. high
[45] Bus ctrl
[46] Bus ctrl, 1 if timeout
[47] Bus ctrl, 0 if timeout
[60] Comparator 0
[61] Comparator 1
[62] Comparator 2
[63] Comparator 3
[64] Comparator 4
[65] Comparator 5
[70] Logic Rule 0
[71] Logic Rule 1
[72] Logic Rule 2
[73] Logic Rule 3
[74] Logic Rule 4
[75] Logic Rule 5
VLT ® HVAC Drive Programming Guide 3. Parameter Description
MG.11.C5.02 - VLT ® is a registered Danfoss trademark
73
3