3.10. Main Menu - Profibus - Group 9
3.10.1. 9-** Profibus
Parameter group for all Profibus-specific parameters.
9-15 PCD Write Configuration
Array [10]
Select the parameters to be assigned to PCD 3 to 10 of the telegrams. The number of available PCDs depends
on the telegram type. The values in PCD 3 to 10 will then be written to the selected parameters as data values.
Alternatively, specify a standard Profibus telegram in par. 9-22.
None
[3-02]
Minimum Reference
[3-03]
Maximum Reference
[3-41]
Ramp 1 Ramp Up Time
[3-42]
Ramp 1 Ramp Down
Time
[3-51]
Ramp 2 Ramp Up Time
[3-52]
Ramp 2 Ramp Down
Time
[3-80]
Jog Ramp Time
[3-81]
Quick Stop Ramp Time
[4-11]
Motor Speed Low Limit
[RPM]
[4-13]
Motor Speed High Limit
[RPM]
[4-16]
Torque Limit Motor
Mode
[4-17]
Torque Limit Generator
Mode
[5-90
]
Digital & Relay Bus
Control
[5-93]
Pulse Out #27 Bus
Control
[5-95]
Pulse Out #29 Bus
Control
[6-53]
Terminal 42 Output
Bus Control
[7-28]
Minimum Feedback
[7-29]
Maximum Feedback
[8-90]
Bus Jog 1 Speed
[8-91]
Bus Jog 2 Speed
[16-80]
Fieldbus CTW 1
[16-82]
Fieldbus REF 1
3. Parameter Description
VLT
®
HVAC Drive Programming Guide
98
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
3