![background image](http://html1.mh-extra.com/html/danfoss/fc-100-series/fc-100-series_programming-manual_3422924020.webp)
2.1.8. Parameter Selection
In the Main Menu mode, the parameters are divided into groups. You
select a parameter group by means of the navigation keys.
The following parameter groups are accessible:
Group no.
Parameter group:
0
Operation/Display
1
Load/Motor
2
Brakes
3
References/Ramps
4
Limits/Warnings
5
Digital In/Out
6
Analog In/Out
8
Comm. and Options
9
Profibus
10
CAN Fieldbus
11
LonWorks
13
Smart Logic
14
Special Functions
15
FC Information
16
Data Readouts
18
Data Readouts 2
20
Drive Closed Loop
21
Ext. Closed Loop
22
Application Functions
23
Time-based Functions
25
Cascade Controller
26
Analog I/O Option MCB 109
After selecting a parameter group, choose a parameter by means of the
navigation keys.
The middle section on the display shows the parameter number and name
as well as the selected parameter value.
1
30BP067.10
2.1.9. Changing Data
The procedure for changing data is the same whether you select a parameter in the Quick menu or the Main menu mode. Press [OK] to change the
selected parameter.
The procedure for changing data depends on whether the selected parameter represents a numerical data value or a text value.
2.1.10. Changing a Text Value
If the selected parameter is a text value, change the text value by means
of the [
▲
] [
▼
] navigation keys.
The up key increases the value, and the down key decreases the value.
Place the cursor on the value you want to save and press [OK].
130BP068.10
2. How to Programme
VLT
®
HVAC Drive Programming Guide
20
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark
2