
V1.0
20170825
59
5. Use
Manual starting of staining program
Click the button “Programs” on the user
interface.
Enter the program selection interface and
touch to select a program from the list.
Click the button “Start”, and the system
exits from the program selection interface
and executes the staining operation
according to the program.
Automatically starting staining program
•
For the P1 shortcut keys, please refer to Section 5.7.5 Distributed Staining
Program.
•
For the setting interface, please refer to Section 5.5.3 where how to enable the
function of automatic staining program startup is described.
•
Load the slide stands to be stained at the loading station and make sure that
they are recognized by the system. When the preset automatic starting time is
reached, the system executes the P1 shortcut key staining program.
Fig.57
It is suggested that the automatic running program be used by the
departments dealing with a large number of staining samples and relatively
simple staining processes. Please set a proper starting time before enabling
this function.
Do not execute other operations after the automatic starting function is used to
recognize slide stands; otherwise, the system recalculates the time, leading to
prolonged automatic starting time.
If it is necessary to run other staining programs, the user only needs to select
the programs before the preset automatic starting time is reached.
The staining program whose
“
Whether effective
”
is
“
No
”
cannot be started, and
the system displays a prompt message.
The user needs to modify the staining program before starting it again.
When the site is waiting to be started, the program can be canceled by removing
the slide from the loading site.
When the dice program is running, the setting menu icon will be grayed out, and
the setting operation will not be allowed. After the dying program is finished, the
setting icon will be activated automatically. At this time, the related operation can
be set normally.