
V1.0
20170825
16
4. Installation
4.4 Connection of Wastewater Discharge Pipeline
•
Pass the pipe clamp (10) through the drain pipe (12) and install it to the
connector of water outlet pipe (refer to Fig. 8).
•
Turn the screw (13) rightward (using the screwdriver) until the pipe clamp (10)
tightly fixes the drain pipe (12) on the connectors (11).
•
Connect the other end of the drain pipe to the wastewater discharge system
at the site (connection method is subject to the design of the wastewater
discharge system).
•
In case of the need of removal, turn the screw (13) leftward (using a
screwdriver) until the pipe clamp (10) releases the drain pipe (12). Then, pull
it out.
Fig.8
11
10
12
13