
V1.0
20170825
56
5. Use
Functions of all buttons
Click to insert a new blank program line next to the current
program step line. The dialog box of step editing is displayed.
Before insertion, a program line must be selected.
Click to delete the selected program line.
Click to save the modified content and exit from the program
view interface.
Touch to activate or cancel the rapid lifting functions (refer to Section
5.7.1).
5.7.5 Setting shortcut staining program
On the user main interface, click the button . And the shortcut program
setting interface is displayed.
The interface list displays all the staining programs stored in the system. The
user can click to select any program, re-click the triangle on the right side of
“Shortcut Key” to display the drop-down option box, and click “Confirm” after
touching and selection. The selected program is then allocated to the shortcut keys
of “P1, P2, P3 and P4”.
After the program is allocated to the shortcut keys, you can press the “Clear”
button to activate it, or press the “Clear” button to reset it on the “P1, P2, P3 and
P4” to blank.
When the apparatus runs normally, it is not allowed to modify the currently
running programs, and the system displays a warning message.
The effective programs must be
selected so that the setting can take
effect on the shortcut keys; the
ineffective programs displayed as
“no” cannot be set on the shortcut
keys and the system will pop out the
prompt dialog box, indicating that
the changes of reagent layout will
render the programs invalid.
Fig.54