
V1.0
20170825
34
5. Use
Quality control setting of lower half area:
•
Enable or disable station quality control: Touch to activate “yes”, and display
of quality control status at this station can be opened. The display is closed if
you activate “no”.
•
Basis of reagent changing warning: The system provides the two methods of
“use time” and “number of dip dyeing frames” for setting. Activate either of
them, input the “sequence of frame or number of days” in the column of
effective dip dyeing below, and input the “sequence of frame or number of
days” in the remaining columns. After that, click the button “Save”, and the
reagent warning function of the current station is activated (Fig. 26).
Reagent management warning and instructions
After the setting of the reagent stations that require quality control is completed
as described above, the top of the reagent stations on the quality control interface
and main interface is indicated in the following colors (Fig. 27):
Green - within shelf life
Yellow - about to expire
Red - expired
The system only allows quality control setting of reagent stations. The
setting of water washing, oven, loading and unloading stations is not
allowed, and the station buttons are at the gray unavailable state.
Fig.26