
V1.0
20170825
54
5. Use
Saving staining program
Inspect to make sure that all program steps are set correctly, and click
the “Save” button so that the newly created staining programs can be
saved and the operator can exist automatically to return to the program
management interface.
5.7.2 Copying staining program
Touch to select the original program to be
copied.
Click the “copy” button, and the dialog
box of the “Copy Staining” program is
displayed. Click “Yes” to confirm, and the
system will automatically create a copied
program named as “ Original Program
Name_COPY”. The program is
When a program is not named or the program running time and station are not
specified, a window displays an error message that prompts wrong step when the
“Save” button is clicked. Only after the operator confirms the message and makes
modification according to the prompt can the program be saved.
The final step in the program must be set to unloading station; otherwise, the
program cannot be saved.
If the button “Return” is directly clicked instead of “Save”, the dialog box “Save”
pops out. Click“Yes”, and the program is saved. Click “No”, and the operator exits
without saving.
Fig.51