Cupra ATECA, Руководство пользователя, Страница: 70 / 380

Operation
Range:
Approximate distance in km
that can still be travelled if the same
driving style is maintained.
Distance:
Distance covered in km (m)
after switching on the ignition.
Average speed:
The average speed
will be shown after driving for approxi-
mately 100 metres.
Digital speed display:
Current
speed displayed in digital format.
Convenience consumers:
Displays a
list of the connected comfort systems
that increase energy consumption, e.g.
air conditioning.
Setting a speed warning
●
Select the display
Warning at --- km/h
or
Speed warning at --- mph
.
●
Press the

button on the multi-function
steering wheel to memorise the current
speed and activate the warning.
● Activate: set the desired speed within 5
seconds by rotating the wheel on the multi-
function steering wheel. Next, press the

button again or wait several seconds. The
speed is stored and the warning activated.
●
Deactivate: press the

button. The stor-
ed speed is deleted.
The warning can be adjusted for speeds be-
tween 30 km/h (18 mph) and 250 km/h
(155 mph).
–
–
–
–
–
Display
Oil temperature
The engine reaches its operating tempera-
ture when, under normal driving conditions,
the oil temperature is between
80°C (176°F)
and
120°C
(248°F). If a great effort is required
from the engine and the outside tempera-
ture is high, the engine oil temperature may
increase. This does not present any problem
as long as the warning lamps

or

›››
page 320 do not appear on the display.
Warning and information messages
(Vehicle status)
The system runs a check on certain compo-
nents and functions when the ignition is
switched on and while the vehicle is moving.
Faults displayed on the instrument panel as
red and yellow warning symbols accompa-
nied with messages and, depending on the
case, even an audible warning
›››
page 77
.
The representation of the messages and
symbols may vary depending on the version
of the instrument panel.
Existing faults can also be checked manually.
To do so, open the menu
Vehicle status
or
Vehicle
›››
page 66
.
Priority 1 warning (red)
The symbol lights up or flashes (in part ac-
companied by audible warnings).

Stop
driving!
Danger! Check the fault and elimi-
nate the cause. If necessary, seek professio-
nal assistance.
Priority 2 warning (yellow)
The symbol lights up or flashes (in part ac-
companied by audible warnings). Operating
faults or the lack of operating fluids can
cause damage to the vehicle or a fault.
Check the faulty function as soon as possi-
ble. If necessary, seek professional assis-
tance.
Information message
It provides information about processes in
the vehicle.
68