Cupra ATECA, Руководство пользователя, Страница: 304 / 380

Driving
Parking and manoeuvring with re-
verse assist
Fig. 248
Display on the Easy Connect system
screen: guide lines.
Meaning of the orientation lines
›››
Fig. 248
Lateral lines:
extension of the vehicle
(approximately in its total width) on the
road.
End of the side lines:
approx. 2 m be-
hind the vehicle on the road.
Intermediate line:
approx. 1 m behind
the vehicle on the road.
Horizontal red line:
a safe distance of
approx. 40 cm at the rear of the vehicle
on the road.
1
2
3
4
Switching the system on and off
●
Reverse assist is connected by a contact
when engaging reverse gear.
●
The system switches off 8 seconds after
disengaging reverse gear and immediately
after removing the contact.
●
The camera will stop transmitting images
above the speed of 15 km/h (9 mph) with re-
verse engaged.
In combination with the parking aid plus sys-
tem
›››
page 291 , the camera image will no
longer be displayed when reverse gear is dis-
engaged, and the system will display the op-
tical information provided by the parking aid
system.
It is also possible to hide the reverse assist
image:
●
By pressing one of the Infotainment system
buttons on the display.
●
OR : by clicking on the miniature vehicle
shown on the screen.
If you wish to display the rear assist image
again:
●
Disengage and re-engage reverse gear.
●
OR: Press the
RVC
function button 1)
Parking manoeuvre
●
Stop the vehicle in front of a space and se-
lect reverse gear.
●
Reverse slowly, and turn the steering wheel
so that the side lines lead towards the park-
ing space.
●
Guide the vehicle into the parking space so
that the side lines run parallel to it.
1) The RVC button will only be displayed when
reverse gear is engaged.
302