Cupra ATECA, Руководство пользователя, Страница: 236 / 380

Driving
Note
●
If the selector lever lock does not engage,
there is a fault. The transmission is inter-
rupted to prevent the vehicle from acci-
dentally moving. To lock the selector lever
again, press the brake pedal, place the se-
lector lever in the P or N position and then
engage a gear.
●
Despite a gear being engaged, the vehicle
does not move forwards or back. Proceed
to the next mode:
–
When the vehicle does not move in the
required direction, the system may not
have the gear range correctly engaged.
Press the brake pedal and engage the
gear range again.
–
If the vehicle still does not move in the
required direction, there is a system
malfunction. Seek specialist assistance
and have the system checked.
Changing gear in Tiptronic mode
Fig. 201
Centre console: tiptronic transmission
Fig. 202
Steering wheel: automatic transmission
levers
Tiptronic gives the driver the option to
change gears manually.
When you change to the Tiptronic pro-
gramme, the vehicle remains in the currently
selected gear. This is possible as long as the
system is not changing gear automatically
due to a traffic situation.
Using Tiptronic with the selector lever
It is possible to change to Tiptronic mode,
both when the vehicle is stopped and while
driving.
●
Starting from the
D/S
position, move the
lever to the right. The instrument panel will
show whether the lever is in manual or Tip-
tronic mode (e.g.
M4
).
●
Push the lever forwards
+
or backwards
–
to move up or down a gear
›››
Fig. 201
.
●
To exit Tiptronic mode, move the lever to
the left.
Using Tiptronic with the steering wheel
paddles
The gearshift paddles can be used when the
selector lever is in the
D/S
or
M
(Tiptronic)
positions.
●
Press the gearshift paddle
+
to select a
higher gear
›››
Fig. 202
.
●
Press the gearshift paddle
–
to select a
lower gear.
●
To exit the Tiptronic mode, pull the right-
hand lever towards the steering wheel for ap-
proximately 1 second or move the lever to
the left.
234