Cupra ATECA, Руководство пользователя, Страница: 170 / 380

Infotainment System
Configuration for sharing a connec-
tion over WLAN
Establishing the connection with the wire-
less network (WLAN)
●
Press the Infotainment button

and then
press the
Settings
menu.
●
Activate the wireless network. To do so,
press the
WLAN
function button.
●
Activate the wireless network (WLAN) on
the device that is to be connected. If neces-
sary, refer to the manufacturer’s instruction
manual.
●
Activate the mobile device assignment on
the Infotainment System. To do so, press the
Enable WLAN connection
button and acti-
vate the checkbox.
●
Enter and confirm the network key dis-
played on the device.
The following settings can also be made on
the menu
Share connection
:
● Security level:
WPA2 encryption auto-
matically generates a network key.
● Network key:
Network key automatically
generated. Press the function button to
manually change the network key. The net-
work key must have a minimum of 8 charac-
ters and a maximum of 63.
● SSID:
WLAN Network name (maximum of
32 characters).
● Do not send network name (SSID):
Activate the checkbox to deactivate the visi-
bility of the wireless (WLAN) network.
The wireless (WLAN) connection is estab-
lished. To complete the connection, it may
be necessary to enter other data into the de-
vice.
Repeat this process to connect other devi-
ces.
Wi-Fi Protected Setup (WPS) 1)
Wi-Fi Protected Setup can be used to create
a ciphered local wireless network quickly and
simply.
●
Establish the connection with the wireless
network (WLAN)
›››
page 191
.
●
Press the WPS button on the WLAN router
until the warning light on the router starts
flashing. If the WLAN router does not sup-
port WPS the network must be configured
manually.
●
OR:
Press and hold the WLAN button on
the WLAN router until the WLAN light on the
router starts flashing.
●
Press the WPS button on the WLAN de-
vice. The wireless (WLAN) connection is es-
tablished.
Repeat this process to connect other devi-
ces.
Configure Internet access
The Infotainment System can use the WLAN
hotspot of an external device to establish an
internet connection.
Establishing the connection with the wire-
less network (WLAN)
●
Activate and check the wireless hotspot on
the external device. If necessary, refer to the
manufacturer’s instruction manual.
●
Press the Infotainment

button and then
press the
Settings
menu;
OR
access
Media
or Media Control mode and press the
SET-
TINGS
menu.
● Press on the menu WLAN > Enable WLAN
connection
and check the verification box.
1) This function depends on the equipment and the
country in question.
168