
Operation
The “Leaving Home” is controlled by a pho-
tosensor.
In the vehicle settings menu of the infotain-
ment system you can adjust the duration of
the light switch-off delay, and activate and
deactivate the function.
Activating the “Coming Home” function
For vehicles with light and rain sensors.
●
Switch off the engine and remove the key
from the ignition with the light switch in posi-
tion
●
The automatic “Coming Home” function is
only active when the light sensor detects
darkness.
For vehicles without light and rain sensors.
●
Switch the ignition off.
●
Activate the headlight flashers for approxi-
mately 1 second.
When the driver door is opened, the “Com-
ing Home” lighting comes on. The delay in
switching off the headlights is counted from
when the last door or boot hatch is closed.
The “Coming Home” lighting turns off in
the following cases:
●
Automatically, once the headlight turn off
delay has elapsed.
●
Automatically, when a vehicle door or the
rear lid is still open 30 seconds after starting
the engine.
●
When the rotary light switch is turned to
position
●
With the ignition is switched on.
Activating the “Leaving Home” function
●
Unlock the vehicle using the remote con-
trol.
●
The “Leaving Home” function is only acti-
vated when the light switch is in position
and the light sensor detects darkness.
The “Leaving Home” lighting switches off
in the following cases:
●
Automatically, when the “Leaving Home”
delay period ends (default 30 sec).
●
When the vehicle is locked using the re-
mote control.
●
When the light switch is turned to position
.
●
With the ignition is switched on.
Welcome light
The welcome light is a light located on the
exterior mirrors, focused on the ground,
which activates or deactivates if the light
switch is in the
position and the “Coming
Home” or “Leaving Home” function is turned
on or off.
Note
To activate the “Coming Home” and “Leav-
ing Home” function, the rotary light switch
must be in position
and the light sensor
must detect darkness.
Hazard warning lights
Fig. 90
Dash panel: hazard warning lights switch
The hazard warning lights are used to draw
the attention of other road users to your ve-
hicle in emergencies.
If your vehicle breaks down:
1. Park your vehicle at a safe distance from
moving traffic.
2. Press the button to switch on the hazard
warning lights
3. Switch the ignition off.
4. Apply the electronic parking brake.
112
Содержание ATECA
