Cupra ATECA, Руководство пользователя, Страница: 124 / 380

Operation
Adjusting the headrests
Fig. 98
Front seat: headrest adjustment.
Fig. 99
Rear headrest: headrest adjustment.
Adjusting the height of the headrests
●
Grab the sides of the headrests with both
hands and push upwards to the desired posi-
tion. To lower it, repeat the same action,
pressing the
1
›››
Fig. 98
›››
Fig. 99
button
on the side.
● The headrest must lock correctly in one
position.
Removing and fitting the headrests
Fig. 100
Rear headrest: removal.
Removing and fitting the front headrests
●
Move the headrest upwards until it arrives
to the top.
●
Press the side button
›››
Fig. 98
1
and re-
move the headrest.
●
To refit, insert the headrest into the holes
in the backrest, pushing it down until it en-
gages.
Removing the rear headrests
To remove the headrest, the corresponding
backrest must be partially folded forward.
●
Unlock the backrest
›››
page 123
.
● Move the headrest upwards until it arrives
to the top.
●
Press button
›››
Fig. 100
1
, while simulta-
neously pressing on the security hole
2
with
a flat screwdriver a maximum of 5 mm wide,
and remove the headrest.
●
Move the backrest until it engages properly
›››
in Folding down and raising the rear
seat backrest on page 123 .
Fitting the rear headrests
To mount the external headrests, the corre-
sponding backrest must be partially folded
forward.
●
Unlock the backrest
›››
page 123
.
●
Insert the headrest bars into the guides
until they perceptibly engage. It should not
be possible to remove the headrest from the
backrest.
●
Move the backrest until it engages properly
›››
in Folding down and raising the rear
seat backrest on page 123 .
WARNING
Remove the rear headrests only when it is
necessary to fit a child seat. After removing
a child seat, refit the headrest immediately.
122