Cupra ATECA, Руководство пользователя, Страница: 119 / 380

Visibility
● Salt on the road: in winter, salt spread on
the roads may cause an excessively long
wipe when the windscreen is almost dry.
●
Dirt: dry dust, wax, coating on glass (Lotus
effect) or traces of detergent (car wash) may
reduce the effectiveness of the rain sensor
or make it react more slowly, later or not at
all.
●
Windscreen crack: the impact of a stone
will trigger a single wipe cycle with the rain
sensor on. Next the rain sensor detects the
reduction in the sensitive surface area and
adapts accordingly. The behaviour of the
sensor will vary with the size of the damage
caused by the stone.
WARNING
The rain sensor may not detect enough rain
to switch on the wipers.
●
If necessary, switch on the wipers man-
ually when water on the windscreen ob-
structs visibility.
Note
●
Clean the sensitive surface of the rain
sensor regularly and check the blades for
damage
›››
Fig. 93 (arrow).
●
To remove wax and coatings, we recom-
mend a window cleaner containing alcohol.
●
Do not put stickers on the windscreen in
front of the rain sensor*. This may cause
sensor disruption or faults.
Mirrors
Interior mirror anti-dazzle function
Rear view mirror with automatic anti-daz-
zle function*
The anti-dazzle function is activated every
time the ignition is switched on.
When the anti-dazzle function is enabled,
the interior rear vision mirror will darken
au-
tomatically
according to the amount of light
it receives. The anti-dazzle function is can-
celled if reverse gear is engaged.
WARNING
In the event that an automatic anti-dazzle
rear vision mirror breaks, an electrolyte flu-
id may leak. This could cause irritation to
the skin, eyes and respiratory organs. If you
come into contact with this liquid, it must
be rinsed with large quantities of water. If
necessary, get medial help.
CAUTION
In the event that an automatic anti-dazzle
rear vision mirror breaks, an electrolyte flu-
id may leak. This liquid attacks plastic sur-
faces. Clean it with a wet sponge as soon as
possible.
Note
●
If the light incident in the interior rear vi-
sion mirror is obstructed (e.g. with the sun
blind*), the anti-dazzle rear vision mirror
with automatic setting will not operate per-
fectly.
●
When the interior lights are on or reverse
gear engaged, the mirrors do not darken
with automatic adjustment for anti-dazzle
position.
●
If you have to stick any type of sticker on
the windscreen, do not do so in front of the
sensors. Doing so could prevent the anti-
dazzle function from working well or even
from working at all.
Adjusting the exterior mirrors
Fig. 94
Detail of the driver's door: control for the
exterior mirror.
»
117