Cupra ATECA, Руководство пользователя, Страница: 303 / 380

Help with parking and manoeuvring
●
Reverse assist will not be available if the
rear lid is open.
Usage instructions
Fig. 247
In the rear lid handle: location of the re-
verse assist camera.
A camera installed in the rear lid handle as-
sists the driver with reverse parking or ma-
noeuvring
›››
Fig. 247 .
The camera image is viewed together with
orientation lines projected on the Infotain-
ment system screen. Part of the bumper can
be seen at the bottom, which can be used by
the driver as a reference point.
Rear assist settings
Rear assist offers the user the possibility to
change the image's brightness, contrast and
colour settings.
To change these settings:
●
Stop the vehicle in a safe place without
switching off the ignition or the infotainment
system.
●
Apply the parking brake.
●
Select reverse gear.
●
Press the

function button displayed on
the screen.
●
Make the desired adjustments on the
menu by pressing the
–
/
+
function buttons
or by moving the scroll button.
Requirements for parking and manoeu-
vring with the rear assist
The system should not be used in the follow-
ing cases:
●
If the image displayed is not very reliable or
is distorted, or if the lens is dirty.
●
If the area behind the vehicle is incom-
plete.
●
If the vehicle is heavily loaded.
●
If the position of the camera has changed
after a rear-end collision. Have the system
checked by a specialised workshop.
Familiarising yourself with the system
To familiarise yourself with the system, the
orientation lines and their function, CUPRA
recommends practising in a place without
too much traffic or in a car park when there
are good weather and visibility conditions.
Cleaning the camera lens
Keep the camera lens clean and clear of
snow and ice:
●
Moisten the lens using a normal alcohol-
based glass cleaning product and clean the
lens with a dry cloth.
●
Remove snow using a small brush.
●
Use de-icing spray to remove any ice.
CAUTION
●
Do not use abrasive cleaning products to
clean the camera lens.
●
Do not use hot or warm water to remove
ice or snow from the camera lens, as it
could be damaged.
301