Cupra ATECA, Руководство пользователя, Страница: 267 / 380

Driver assistance systems
Fig. 224

: The system is operational,
the highlighted line
1
indicates that
there was a risk of involuntarily crossing
the lane line and that the steering is be-
ing adjusted to correct the angle.
Fig. 224

: The two highlighted lines
1
and
2
light up simultaneously when
both lane lines are recognised and the
Lane Assist function is activated.
Operating mode
Steering wheel vibration
The following situations can cause vibration
in the steering wheel and require the driver
to take active control of driving:
●
When the steering angle assist value re-
quired to keep the vehicle in the lane is high-
er than the system’s maximum operating val-
ue.
●
If the system ceases to display the lane
lines while assisting with steering.
Switching the Lane Assist system on or off
●
Select the corresponding menu option us-
ing the button for the driver assistance sys-
tems
›››
page 77
.
●
OR: by using the Easy Connect system with
button
 > SETTINGS > Driver assis-
tance
›››
page 80 .
–
–
Lane Assist with lane centring guide
The
Lane Centring Guide
function is in-
tended to keep the vehicle in the centre of
the lane.
If the driver has a tendency to veer slightly
off centre in the lane, the system adapts to
driver preferences.
●
The
Lane Centring Guide
function is ac-
tivated/deactivated in the Easy Connect sys-
tem using the

> SETTINGS
›››
page 80
button.
Automatic deactivation: the Lane Assist
system can be automatically deactivated if
there is a system malfunction. The control
lamp disappears.
Hands-Off Function
In the absence of steering wheel activity the
system alerts the driver with acoustic signals
and a text message on the dash panel asking
to actively take over the steering.
If the driver does not react to this, the system
also alerts the driver with a little shaking mo-
tion through the brakes and, if the vehicle
has it, activates the Emergency Assist func-
tion
›››
page 268 .
In vehicles without Emergency Assist, the
adaptive lane guidance function will be disa-
bled after the corresponding warnings to the
driver.
The lane assist system is active but it is not
available (the control lamp is lit up yellow)
●
When driving at speeds below 65 km/h (38
mph).
● When the Lane Assist system does not de-
tect the dividing lines of the road. For exam-
ple, in the event warnings indicating road
works, and snow, dirt, moisture or reflec-
tions.
●
When the radius of a curve is too small.
●
When no road markings can be seen.
●
When the distance to the next marking to
too great.
●
When the system does not detect any
clear and active steering movement during a
long period of time.
●
Temporarily, in the event of very dynamic
driving styles.
●
If a turn signal is activated.
●
With the stability control system (ESC) in
Sport mode or switched off.
BSD Plus (Lane Assist with Blind Spot As-
sist)*
The BSD Plus function is achieved by activat-
ing the Lane Assist and BSD functions
›››
page 269
. In this case, the Lane Assist
function expands its functions in the follow-
ing way:
»
265