Cupra ATECA, Руководство пользователя, Страница: 266 / 380

Driving
Control lamp
 It lights up yellow
Lane Assist system active but not available.
The system cannot accurately recognize the lane.
See
page 265
, lane assist system not available (the
control lamp is lit up in yellow)
 It lights up green
Lane Assist system active and available.


It lights up yellow
Error in the lane departure warning system. Take the
vehicle to a specialised workshop to repair the fault.
Some control and warning lamps will light up
briefly when the ignition is switched on to
check certain functions. They will switch off
after a few seconds.
WARNING
Observe the safety warnings
›››
in Con-
trol and warning lamps on page 79 .
Indications on the instrument panel
display
Fig. 223
On the instrument panel display: Indica-
tion on the Lane Assist system display (example 1).
Fig. 224
On the instrument panel display: Indica-
tion on the Lane Assist system display (example 2).
Status display
Fig. 223

: The system is active, but not
available, either because the minimum
speed has not been reached or because
the lane lines are not recognised.
Fig. 223

: The system is active and
available, both lane lines are recog-
nised. The steering angle is not being
corrected at this moment.
–
–
264