Cupra ATECA, Руководство пользователя, Страница: 337 / 380

Wheels
and when driving through corners, and
braking is also adversely affected.
●
The speed has to be adapted accordingly,
otherwise there is a risk of losing control
over the vehicle.
Wheel nuts
The wheel nuts are matched to the rims.
When installing different wheels (for instance
alloy wheels or wheels with winter tyres) it is
important to use the correct wheel nuts with
the right length and correctly shaped bolt
heads. This ensures that wheels are fitted se-
curely and that the brake system functions
correctly.
The wheel nuts must be clean and turn easi-
ly.
A special adapter is required to turn the anti-
theft wheel nuts*
›››
page 42
.
WARNING
Wheel nuts should never be greased or
oiled.
●
Use only wheel nuts which belong to the
wheel.
●
If the prescribed torque of the wheel nuts
is too low, they could loosen whilst the ve-
hicle is in motion. Risk of accident! If the
tightening torque is too high, the wheel
nuts and threads can be damaged.
CAUTION
See
›››
page 44 to find out the recommen-
ded tightening torque for wheel nuts for
steel and alloy rims.
Winter tyres
–
Winter tyres must be fitted
on all four
wheels.
–
Only use winter tyres that are approved for
your vehicle.
–
Please note that the maximum permissible
speed for winter tyres may be lower than
for summer tyres.
–
Also note that winter tyres are no longer
effective when the
tread is worn down.
–
After fitting the wheels you must always
check the tyre pressures. When doing so,
take into account the correct tyre pres-
sures listed on the rear of the front left
door frame
›››
page 333
.
In winter road conditions winter tyres will
considerably improve vehicle handling. The
design of summer tyres (width, rubber com-
pound, tread pattern) gives less grip on ice
and snow. This applies particularly to vehi-
cles equipped with
wide section tyres
or
with high speed tyres (code letters H, V or Y
on the sidewall).
Only use winter tyres of the correct type ap-
proved for your vehicle. The sizes of these
tyres are specified in the vehicle's docu-
ments (e.g. EC Certificate of Conformity or
COC
1) ). The vehicle documentation varies
depending on the country of residence.
Winter tyres lose a great deal of their proper-
ties when the
tread is worn down to a depth
of 4 mm.
The performance of winter tyres is also se-
verely impaired by
ageing , even if the tread is
still much deeper than 4 mm.
A code letter indicating the speed limit is
stamped on all winter tyres
›››
page 331 .
Vehicles capable of exceeding these speeds
must have an appropriate
sticker
attached
so that it is visible to the driver. Suitable
stickers are available at specialised CUPRA
Services, SEAT Official Service centres and
specialised workshops. Please note the reg-
ulations to this effect in your country.
“All-weather” tyres can also be used instead
of winter tyres.
»
1) COC = certificate of conformity.
335