Cupra ATECA, Руководство пользователя, Страница: 112 / 380

Operation
Convenience turn signals are activated and
deactivated in the Easy Connect system us-
ing the key
 > SETTINGS > Lightihg >
Light assistance > Convenience turn
signals
›››
page 80 .
In vehicles that do not have the correspond-
ing menu, this function can be deactivated in
a specialised workshop.
Parking light

The parking lights will only work with the ig-
nition off. If said light is on, an audible warn-
ing will sound while the driver door is open.
●
Switch the ignition off.
●
Move the turn signal lever up or down.
When the parking light is switched on, the
front side light and the tail light on the corre-
sponding side of the vehicle turn on.
Parking light on both sides
●
Switch the ignition off.
●
Place the light switch in position

.
●
Lock the vehicle from the outside.
In doing so, only the side lights of both head-
lights light up, and additionally the tail lights
will do so partially.
WARNING
Improper or lack of use of the turn signals,
or forgetting to deactivate them can con-
fuse other road users. This could result in a
serious accident.
●
Always give warning when you are going
to change lane, overtake or when turning,
activating the turn signal in good time.
●
As soon as you have finished changing
lane, overtaking or turning, switch the turn
signal off.
WARNING
Incorrect use of the headlights may cause
accidents and serious injury, as the main
beam may distract or dazzle other drivers.
Note
●
If the convenience turn signals are oper-
ating (three flashes) and the other conven-
ience turn signals are switched on, the ac-
tive part stops flashing and only flashes
once in the new part selected.
●
The turn signal only works when the igni-
tion is switched on. The hazard warning
lights also work when the ignition is switch-
ed off.
●
If a trailer turn signal malfunctions, the
control lamp will stop flashing (trailer turn
signals) and the vehicle turn signal will flash
at double speed.
●
The
main beam headlights
can only be
switched on if the dipped beam headlights
are already on.
●
In cold or damp weather conditions, the
headlights, tail lights and turn signals may
mist up inside temporarily. This is normal
and in no way effects the useful life of the
vehicle lighting system.
●
The parking light does not activate auto-
matically if the left- or right-hand turn sig-
nal is left on and the ignition is disconnec-
ted.
Main beam assist (Light Assist)*
The main beam assist acts within the limits of
the system and depending on environmental
and traffic conditions. Once switched on, the
system is activated as of a speed of about 60
km/h (37 mph) and is deactivated below
about 30 km/h (18 mph)
›››
.
When the system is activated and the cam-
era detects other vehicles that may be daz-
zled, the main beam is automatically switch-
ed off. Otherwise, the main beam is auto-
matically switched on.
The main beam assist generally detects illu-
minated areas and deactivates the main
beam when passing through a town, for ex-
ample.
110