Cupra ATECA, Руководство пользователя, Страница: 121 / 380

Visibility
●
Only fold or unfold the exterior mirror
when there is no-one in the way of the mir-
ror.
●
When moving the mirror, take care not to
trap fingers between the mirror and the
mirror bracket.
CAUTION
●
If one of the mirror housings is knocked
out of position (e.g. when parking), the
mirrors must first be fully retracted with the
electric control. Do not readjust the mirror
housing by hand, as this will interfere with
the mirror adjuster function.
●
Before washing the vehicle in an auto-
matic car wash, please make sure to retract
the exterior mirrors to prevent them from
being damaged. Electrically retractable ex-
terior mirrors must not be folded in or out
by hand. Always use the electrical power
control.
Note
●
If the electrical adjustment should fail to
operate, both of the mirrors can be adjus-
ted by hand by lightly pressing the edge of
the mirror glass.
●
The fold-in function on the exterior mir-
rors will not activate at speeds over
40 km/h (25 mph).
Sun protection
sun blind
Fig. 95
Sun visor
Options for adjusting driver and front pas-
senger sun visors
●
Lower the sun visor towards the wind-
screen.
●
The sun visor can be pulled out of its
mounting and turned towards the door
›››
Fig. 95
1
.
●
Swing the sun visor towards the door, lon-
gitudinally backwards.
There is a vanity mirror on the sun visor, with
a cover. When the cover is opened
2
a light
comes on.
The lamp goes out when the vanity mirror
cover is closed or the sun visor is pushed
back up.
WARNING
Folded sun blinds can reduce visibility.
●
Always store sun blinds and visors in their
housing when not in use.
Note
The light above the sun visor automatically
switches off after a few minutes in certain
conditions. This prevents the battery from
discharging.
119