Cognex In-Sight 1721, Руководство пользователя

Страница: 16 / 156

Section 2: Installing the Wafer Reader In-Sight
®
1700 Series Wafer Reader
6
2.1.2 Connecting the In-Sight 1700/1701 Wafer Reader
The In-Sight 1700/1701 wafer reader has two RJ-45 connector ports: the Network Port
and the Breakout Port (see Figure 2-2). The Network Port provides the Ethernet
connection for network communications. The Breakout Port supplies connections for the
24VDC power source, I/O, acquisition trigger, and serial communications.
Figure 2-2: Location of RJ-45 Ports
2.1.3 Connecting the Network Cable
If you are connecting to an Ethernet switch, plug one of the RJ-45 connectors of a
CAT5 straight-pinned cable into the Network Port and plug the other end into an
available port on the switch/router.
If you are connecting directly to an In-Sight sensor from a remote host, plug
one end of a CAT5 network cable into the wafer reader’s Network Port; plug the other
end into the remote host’s Ethernet port.
NOTE The In-Sight 1700 and 1701 wafer readers require a standard CAT5 network cable and crossover
coupler or a CAT5 crossover cable in this configuration.