Cognex In-Sight 1721, Руководство пользователя

Страница: 101 / 156

In-Sight
®
1700 Series Wafer Reader Section 7: Native Mode Commands
91
7.6 Evaluate Extended Native Mode Commands
(Set)
The following commands are used in conjunction with the Evaluate (EV) extended Native
Mode command to change Config settings in a wafer ID job. Each command returns a
Status Code, and the number of characters (in bytes, including Carriage Returns and
Line Feeds) in the output that follows.
Syntax : EV [command]
The status codes for all Evaluate commands are:
STATUS CODE DESCRIPTION
1 The command was executed successfully.
0 Unrecognized command.
-2 The command could not be executed.
7.6.1 EV SetConfig
EVSetConfigAccept(<WafID>,<Config>,<Mark>,<Checksum>,<LightMode>,
<LightPower>,<Orientation>,<Row>,<Col>,<High>,<Wide>,<Theta>,<Phi>,<High>,
<Wide>,<CharSpacing>,<"FieldString">,<"FieldDef">,<Color>,<Accept>,<Enable>,
<Retry>,<BComp>,<Thresh>)
Specifies all settings for the specified Config.
Inputs : WafID, Config, Mark, Checksum, LightMode, LightPower, Orientation, Row, Col,
High, Wide, Theta, Phi, High, Wide, CharSpacing, FieldString, FieldDef, Color, Accept,
Enable, Retry, BComp, Thresh
Outputs : Status Code, # of bytes
Sample Input and Output
EV SETCONFIG(A4,0,4,2,1,2,0,280,45,100,500,0,0,42,22,1,"
**********CS
"
,
""
,2,50,1,0,0,25)
1
0