Cognex In-Sight 1721 Скачать руководство пользователя

Страница: 61 / 156

In-Sight

1700 Series Wafer Reader

Section 5: Running the Job

5.1.2 Read Log

A record of the most recent read results. This log returns the string, score, and pass/fail
status of each Config that is read or retried.

NOTE

If the wafer reader is Offline, a continuous log is displayed. If the wafer reader is Online, only the

last read results are displayed.

5.1.3 Statistics Window

A statistical record of the read results.

NOTE

Any changes to a Config’s settings will reset the statistics for that Config, but do not change the

overall statistics.

Config

The index of each enabled Config.

Attempts

The number of times the Config has been used during reading.

Passed

The number of times the Config read successfully.

Failed

The number of times the Config failed to read.

Response Avg

The average raw response score of all attempted reads for the Config.

Overall

The cumulative statistics from the results of all reads.

NOTES

■

The Overall statistics are calculated independently of the statistics for the individual Configs.

■

If Retry is enabled from the Setup tab, the Attempts, Passed and Failed statistics do not reflect any

retries.

5.1.4 Read

The

Read

button acquires an image and reads the wafer mark. The String and Score

results are reported to the right. The Read button is grayed out when the Online
checkbox in enabled.

Содержание In-Sight 1721





























































































































































Результаты поиска

Содержание In-Sight 1721

Отзывы:

Похожие инструкции для In-Sight 1721

Бренды по названию

Популярные бренды

Cognex In-Sight 1721, Руководство пользователя

Результаты поиска

Содержание In-Sight 1721

Отзывы:

Похожие инструкции для In-Sight 1721

Бренды по названию

Популярные бренды