Cognex In-Sight 1721 Скачать руководство пользователя

Страница: 43 / 156

In-Sight

1700 Series Wafer Reader

Section 3: Configuring a Wafer ID Application

To rotate the region, press

CTRL+R

on the keyboard. In the upper left-hand

corner of the region, the rotate region icon,

, will appear. When the cursor

moves over the icon, it changes to the rotate region cursor,

Click and drag

the rotate region cursor with the left mouse button to rotate the region. To rotate
the region one pixel at a time, use the

CTRL

+Left/Right arrow keys. The region

can be rotated

180 degrees. When rotating the region, the angle setting is

displayed along with the other region settings. The mark must still be within

degrees of the horizontal axis of the region.

To curve the region, press

CTRL+R

on the keyboard. In the upper right-hand

corner of the region, the curve region icon,

, will appear. When the cursor

moves over the icon, it changes to the curve region cursor,

Click and drag

the curve region cursor with the left mouse button to curve the region. To curve
the region one pixel at a time, use the

CTRL

+Up/Down arrow keys. The region

can be curved

360 degrees. When curving the region, the curve setting is

displayed along with the other region settings. The mark must still be within

degrees of the horizontal axis of the region.

NOTES

■

The Zoom function can be especially useful when setting the Size.

■

When '2D Sym, T7 Data Matrix' is the selected Mark, the Region must be set no larger than 120

pixels high. If the Region height is set larger than 120 pixels, the read will fail. Also, setting the

region to an angle other than zero may lower the accuracy of the read.

■

Although the region can be rotated, it is strongly recommended that the wafer reader be mounted

so the mark aligns parallel to the horizontal image axis. Setting the region to an angle other than

zero will increase read time.

■

If both the rotation and the curve of the region are set to zero, only the image coordinates and the

size of the region (row, column, height, width) are displayed below the box.

To finish editing the region and accept the changes, double left-click anywhere in the
image or click the

Save

button above the image area.

Содержание In-Sight 1721





























































































































































Результаты поиска

Содержание In-Sight 1721

Отзывы:

Похожие инструкции для In-Sight 1721

Бренды по названию

Популярные бренды

Cognex In-Sight 1721, Руководство пользователя

Результаты поиска

Содержание In-Sight 1721

Отзывы:

Похожие инструкции для In-Sight 1721

Бренды по названию

Популярные бренды