Cognex In-Sight 1721, Руководство пользователя

Страница: 13 / 156

In-Sight
®
1700 Series Wafer Reader Section 1: Introduction
Please note that the In-Sight 1700 and 1701 wafer readers require a standard CAT5
network cable and crossover coupler or a CAT5 crossover cable in this configuration.
NOTE If the Microsoft "Media Sense" feature, which automatically detects whether or not your network
interface is linked to a network, is enabled when running Microsoft Windows 2000 or XP,
communication with an In-Sight wafer reader may not be established. It is recommended to use a
hub or switch with a standard Ethernet cable to configure the In-Sight wafer reader or configure
your PC to disable the Media Sense feature. See Microsoft Knowledge Base article 239924 for
details on this process.
Figure 1-1: Standalone In-Sight Network
Configurations Using Switches/Routers
An In-Sight network may be extended to include multiple In-Sight wafer readers by using
an Ethernet switch or network router. The only limit on the size of this type of network is
the number of routers or switches connected and the number of connections they
provide.
To install multiple wafer readers on a standalone In-Sight network, use a switch/router
between the wafer readers and the remote host. Make all connections via standard,
straight-pinned CAT5 cable (Figure 1-2).
Figure 1-2: Standalone In-Sight Network With Ethernet Switch
3