Cisco ONS 15310-CL, Руководство по устранению неисправностей

Страница: 295 / 332

1-19
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
78-17235-01
Chapter 1 Error Messages
EID-3097 The ring termination is in use. The ring termination you are trying to
access is in use. Try after sometime.
EID-3098 No ring terminations selected. Select one of the ring terminations.
EID-3099 Sorry, entered key does not match existing authentication key. Check the authentication key and reenter.
EID-3100 Error encountered during authentication. There was an error in authentication. Verify
that the key does not exceed the character
limit .
EID-3101 DCC Metric is not in the range 1 - 65535. The DCC metric should be in the range of 1
to 65535.
EID-3102 Invalid DCC Metric There was an invalid DCC metric.
EID-3103 Invalid IP Address: {0} The IP address is invalid.
EID-3104 Router priority is not in the range of 0 - 255 The router priority should be in the range of
0 to 255.
EID-3105 Invalid Router Priority The router priority is invalid.
EID-3106 Hello Interval is not in the range of 1 - 65535 The hello interval should be in the range of
1 to 65535.
EID-3107 Invalid Hello Interval The hello interval is invalid.
EID-3109 Invalid Dead Interval value. Valid range is 1 - 2147483647 The dead interval value must be between 1
and 2147483647.
EID-3110 Dead Interval must be larger than Hello Interval Refer to the error message text.
EID-3111 LAN transit delay is not in the range of 1 - 3600 seconds The LAN transit delay should be in the
range of 1 to 3600 seconds.
EID-3112 Invalid Transmit Delay The transmit delay is invalid.
EID-3113 Retransmit Interval is not in the range 1 - 3600 seconds The retransmit interval should be in the
range of 1 to 3600 seconds.
EID-3114 Invalid Retransit Interval The retransmit interval is invalid.
EID-3115 LAN Metric is not in the range 1 - 65535. The LAN metric should be in the range of 1
to 65535.
EID-3116 Invalid LAN Metric The LAN metric is invalid.
EID-3117 If OSPF is active on LAN, no DCC Area Ids may be 0.0.0.0.
Please change all DCC Area Ids to non-0.0.0.0 values before
enabling OSPF on the LAN. Refer to the error message text.
EID-3118 If OSPF is active on LAN, LAN Area ID may not be the same
as DCC Area Id. LAN must be part of a different OSPF area
other than the DCC network.
EID-3119 Validation Error CTC was unable to validate the values
entered by the user. This error message is
common to several different provisioning
tabs within CTC (examples include the
SNMP provisioning tab, the General>
Network provisioning tab, the Security >
Configuration provisioning tab, etc.).
Table 1-1 Error Messages (continued)
Error Warning
ID
Error Warning Message Description