Cisco ONS 15310-CL, Руководство по устранению неисправностей

Страница: 264 / 332

1-158
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
78-17235-01
Chapter 1 Alarm Troubleshooting
1.10.4 Generic Signal and Circuit Procedures
Step 7
If a row shows a state other than IS, click in the column cell to display the drop-down list and select IS .
Step 8 Click Apply .
Note If ports managed into IS administrative state are not receiving signals, the LOS alarm is either
raised or remains, and the port service state transitions to OOS-AU,FLT.
Clear an EC-1 Port Loopback
Step 1
Log into a node on the network. If you are already logged in, continue with Step 2 .
Step 2 Double-click the reporting card in CTC to display the card view.
Step 3
Click the Maintenance > EC1 > Loopback tabs.
Step 4
In the Loopback Type column, determine whether any port row shows a state other than None.
Step 5
If a row contains another state besides None, click in the column cell to display the drop-down list and
select
None .
Step 6 In the Admin State column, determine whether any port row shows a state other than IS .
Step 7
If a row shows a state other than IS, click in the column cell to display the drop-down list and select IS .
Step 8 Click Apply .
Note If ports managed into IS administrative state are not receiving signals, the LOS alarm is either
raised or remains, and the port service state transitions to OOS-AU,FLT.
Clear an Ethernet Card Loopback Circuit
This procedure applies to CE-100T-8 or ML-100T-8 cards.
Step 1
Log into a node on the network. If you are already logged in, continue with Step 2 .
Step 2 Double-click the reporting card in CTC to display the card view.
Step 3
Click the Maintenance > Loopback tabs.
Step 4
In the Loopback Type column, determine whether any port row shows a state other than None.
Step 5
If a row contains another state besides None, click in the column cell to display the drop-down list and
select
None .
Step 6
In the Admin State column, determine whether any port row shows a state other than IS, for example,
OOS,MT
.
Step 7
If a row shows a state other than IS, click in the column cell to display the drop-down list and select IS .
Step 8 Click Apply .