Cisco ONS 15310-CL, Руководство по устранению неисправностей

Страница: 257 / 332

1-151
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
78-17235-01
Chapter 1 Alarm Troubleshooting
1.10.1 Protection Switching, Lock Initiation, and Clearing
Initiate a Card or Port Lockout Command
Note
For ONS 15310-MA 1:1 electrical protection groups, working or protect cards can be placed in the
Lock Out state. For a 1+1 optical protection group, only the protect port can be placed in the Lock Out
state.
Step 1
In node view, click the Maintenance > Protection tabs.
Step 2
In the Protection Groups list, click the protection group that contains the card you want to lock out.
Step 3
In the Selected Group list, click the card where you want to lock out traffic.
Step 4 In the Inhibit Switching area, click Lock Out .
Step 5
Click Yes in the confirmation dialog box.
The lockout has been applied and traffic is switched to the opposite card.
Clear a Lock-On or Lockout Command
Step 1
In node view, click the Maintenance > Protection tabs.
Step 2 In the Protection Groups list, click the protection group that contains the card you want to clear.
Step 3
In the Selected Group list, click the card you want to clear.
Step 4
In the Inhibit Switching area, click Unlock .
Step 5
Click Yes in the confirmation dialog box.
The lock-on or lockout is cleared.
Initiate an ONS 15310-MA 1:1 Card Switch Command
Note The Switch command only works on the Active card, whether it is working or protect. It does not work
on the Standby card.
Step 1 In node view, click the Maintenance > Protection tabs.
Step 2
Click the protection group that contains the card you want to switch.
Step 3 Under Selected Group, click the active card.
Step 4
Next to Switch Commands, click Switch .
The working slot should change to Working/Standby and the protect slot should change to
Protect/Active.