Cisco ONS 15310-CL, Руководство по устранению неисправностей

Страница: 151 / 332

1-45
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
78-17235-01
Chapter 1 Alarm Troubleshooting
1.7.49 DS3-MISM
Clear the DISCONNECTED Alarm
Step 1
Restart the CTC application.
Step 2 If the alarm does not clear, log into the Technical Support Website at http://www.cisco.com/techsupport
for more information or call Cisco TAC (1-800-553-2447).
1.7.49 DS3-MISM
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: DS3
The DS-3 Frame Format Mismatch condition indicates that a line type format mismatch on a signal
received on the DS-3 port of a 15310-CL-CTX, DS1-28/DS3-EC1-3, or DS1-84/DS3-EC1-3 card. The
condition occurs when the provisioned line type and incoming signal frame format type do no match.
For example, if the line type for a DS-3 port is set to C Bit and the incoming signal line type is detected
as M13, then the port reports a DS3-MISM condition.
Clear the DS3-MISM Condition
Step 1 In node view, double-click the CTX2500 to display the card view.
Step 2
Click the Provisioning > DS3 > Line tabs.
Step 3 For the row on the appropriate port, verify that the Line Type column is set to match the expected
incoming signal (C bit or M13).
Step 4
If the Line Type field does not match the expected incoming signal, select the correct Line Type in the
drop-down list.
Step 5 Click Apply .
Step 6
If the condition does not clear after the user verifies that the provisioned line type matches the expected
incoming signal, use an optical test set to verify that the actual signal coming into the node matches the
expected incoming signal. For specific procedures to use the test set equipment, consult the
manufacturer.
Step 7 If the condition does not clear, log into the Technical Support Website at
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).
1.7.50 DUP-IPADDR
Default Severity: Minor (MN), Non-Service Affecting (NSA)
SONET Logical Object: NE