Cisco ONS 15310-CL, Руководство по устранению неисправностей

Страница: 144 / 332

1-38
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
78-17235-01
Chapter 1 Alarm Troubleshooting
1.7.39 COMIOXC
Note
When you replace a card with the identical type of card, you do not need to make any changes
to the database.
Step 3
If the condition does not clear, log into the Technical Support Website at
http://www.cisco.com/techsupport for more information or call Cisco TAC (1 800 553-2447).
1.7.39 COMIOXC
Default Severity: Critical (CR), Service-Affecting (SA)
SONET Logical Object: EQPT
The Input/Output Slot To Cross-Connect Communication Failure alarm is caused by the 15310-CL-CTX
or CTX2500 card when there is a communication failure for a traffic slot.
Clear the COMIOXC Alarm
Step 1
Complete the “Soft- or Hard-Reset an Ethernet or Electrical Card in CTC” procedure on page 1-154 on
the 15310-CL-CTX or CTX2500 card.
Caution Avoid soft-resetting multiple ONS 15310-MA cards at one time; doing so might cause an unexpected
traffic hit.
Step 2
Verify that the reset is complete and error-free and that no new related alarms appear in CTC. A green
ACT LED indicates an active card.
Step 3
If the alarm does not clear, log into the Technical Support Website at http://www.cisco.com/techsupport
for more information or call Cisco TAC (1 800 553-2447) in order to report a Service-Affecting (SA)
problem.
1.7.40 CONTBUS-CLK-A
Default Severity: Minor (MN), Non-Service-Affecting (NSA) for ONS 15310-MA
SONET Logical Object: EQPT
An Inbound Interconnection Timing Control Bus 1 Failure alarm on the Slot 3 CTX2500 occurs if the
timing signal from the Slot 4 CTX2500 has an error. If the Slot 3 CTX2500 and all other cards on the
shelf raise this alarm, the alarm processor on the Slot 4 CTX2500 clears the alarm on the other cards and
raises this alarm against the Slot 3 CTX2500 only.