Cisco ONS 15310-CL, Руководство по устранению неисправностей

Страница: 133 / 332

1-27
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
78-17235-01
Chapter 1 Alarm Troubleshooting
1.7.21 AUD-LOG-LOSS
The AS-MT-OOG alarm clears when an STS or VT member transitions to a different state from IDLE
(AS-MT-OOG) or when it is removed completely from the VCAT group. It does not require
troubleshooting unless it does not clear.
If the alarm does not clear, log into the Technical Support Website at http://www.cisco.com/techsupport
for more information or call Cisco TAC (1 800 553-2447).
1.7.21 AUD-LOG-LOSS
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: NE
The Audit Trail Log Loss condition occurs when the log is 100 percent full and the oldest entries are
being replaced with new entries. The log capacity is 640 entries. The log must be off-loaded using the
following procedure to make room for more entries.
Clear the AUD-LOG-LOSS Condition
Step 1
In node view, click the Maintenance > Audit tabs.
Step 2 Click Retrieve .
Step 3
Click Archive .
Step 4
In the Archive Audit Trail dialog box, navigate to the directory (local or network) where you want to
save the file.
Step 5
Enter a name in the File Name field.
You do not have to assign an extension to the file. It is readable in any application that supports text files,
such as WordPad, Microsoft Word (imported), etc.
Step 6
Click Save .
The 640 entries are saved in this file. New entries continue with the next number in the sequence, rather
than starting over.
Step 7
If the alarm does not clear, log into the Technical Support Website at http://www.cisco.com/techsupport
for more information or call Cisco TAC (1 800 553-2447).
1.7.22 AUD-LOG-LOW
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: NE
The Audit Trail Log Low condition occurs when the audit trail log is 80 percent full.
Note
AUD-LOG-LOW is an informational condition and does not require troubleshooting.