Cisco ONS 15310-CL, Руководство по устранению неисправностей

Страница: 313 / 332

1-37
Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0
78-17235-01
Chapter 1 Error Messages
EID-6024 The destination of a {0} route cannot be a class D (224.0.0.0/4)
or class E (240.0.0.0/4) address. The destination of a static route must not be
a class D or class E address.
EID-6025 The destination of a {0} route cannot be a class A broadcast
address (x.255.255.255/8) The destination of a static route must not be
a class A broadcast address. It should be
(xxx.0.0.0).
EID-6026 The destination of a {0} route cannot be a class B broadcast
address (x.x.255.255/16) The destination of a static route must not be
a class B broadcast address.
EID-6027 The destination of a {0} route cannot be a class C broadcast
address (x.x.x.255/24) The destination of a static route must not be
a class C broadcast address.
EID-6028 The destination of a {0} route cannot be the subnet broadcast
address associated with a node IP address. The destination of a static route must not be
a subnet broadcast address of a node IP.
EID-6029 The next hop of a static route cannot be the same as the
destination of the route or an internal network{0}. Static route must have the default route as
the next hop, and not destination of the
route or internal network.
EID-6030 The next hop of a static default route must be the provisioned
default router. The default route is selected for networks
that do not have a specific route.
EID-6031 No more static routes can be created. You have reached the maximum number of
static routes.
EID-6032 This static route already exists. Refer to the error message text.
EID-6033 Previous operation is still in progress. Another operation is in progress. You must
try after sometime.
EID-6035 Parent entity does not exist. Refer to the error message text.
EID-6036 Parent PPM entity does not exist. Create a parent entity for the PPM.
EID-6037 Equipment type is not supported. CTC does not support this equipment.
EID-6038 Invalid PPM port. Refer to the error message text.
EID-6039 Card is part of a regeneration group. Select another card.
EID-6040 Out of memory. Refer to the error message text.
EID-6041 Port is already present. Refer to the error message text.
EID-6042 Port is used as timing source. Choose another port because the selected
port is being used as a timing source.
EID-6043 DCC or GCC is present. Refer to the error message text.
EID-6044 Card or port is part of protection group. Refer to the error message text.
EID-6045 Port has overhead circuit(s). Refer to the error message text.
EID-6046 G.709 configuration is not compatible with data rate. Refer to the error message text.
EID-6047 Port cannot be deleted because its service state is
OOS-MA,LPBK&MT. To delete the port, you must change the port
state to OOS-DSBLD.
EID-6048 {0} is {1}. The trunk port is in the wrong state to carry
out the action.
Table 1-1 Error Messages (continued)
Error Warning
ID
Error Warning Message Description