CareFusion IVAC P6000, Техническое и сервисное руководство

Страница: 8 / 106

Introduction and Start Up
P7000, P6000, TIVA, TCI & TIVA 8/106 1000SM00012 Issue 8
1. Squeeze the finger grips together on the plunger holder and slide the mechanism to the left.
2. Lift the syringe clamp and rotate to the left.
3. Insert the syringe into the slots on the plunger holder (see Figure 1). For Model
TCI & TIVA only - ensure that the
Diprifusor tag is positioned towards the display to allow the prefilled syringe tag to be read.
4. Squeeze the finger grips on the plunger holder and slide the mechanism to the right until the syringe barrel flange
locates into the V slot (see Figure 2).
Loading a Syringe
Ensure that the syringe is advanced until the syringe barrel flange touches the front of the V slot
closest to the syringe clamp. This is important to prevent delay at the start of the infusion.
5. Release the finger grips. Apply gentle pressure on the plunger holder to ensure that the drive is engaged.
6. Rotate the syringe clamp until it locks onto the syringe barrel (see Figure 2).
7. Check that the syringe plunger and syringe barrel flange are correctly located into their slots.
Figure 1.
Finger grips
Syringe plunger
Plunger holder
Syringe barrel
Syringe barrel flange
Syringe clamp
Figure 2.
Syringe clamp shown
locked onto syringe barrel
Syringe barrel flange
V slot
Syringe inserted
into plunger holder slots