CareFusion IVAC P6000, Техническое и сервисное руководство

Страница: 6 / 106

Introduction and Start Up
P7000, P6000, TIVA, TCI & TIVA 6/106 1000SM00012 Issue 8
Front Panel, Controls and Indicators
Front Panel
Front Panel - Model P6000 example
Controls and Indicators
H
START Press to start the infusion. The
green LED will flash during
infusion.
I
STOP Press to stop/hold the infusion.
The amber LED will be lit while on
hold.
j
BATTERY When illuminated, indicates
that the pump is running on the
internal backup battery. When
flashing, indicates that the battery
power is low, with less than 30
minutes of use remaining.
k
AC POWER When illuminated, indicates that
the pump is connected to an AC
power supply and the battery is
being charged.
N
O
RATE KEYS/
CHEVRONS
Double or single for faster/slower,
increase or decrease of values
shown on main display.
C
BLANK
SOFTKEYS
Use in conjunction with the
prompts shown on the display.
G
PURGE/
BOLUS
Press to purge the extension
set during setup while the
pump is on hold, or to deliver
bolus at an increased rate
while an infusion is running.
See 'Basic Features' for further
information.
D
OPTION Press to access optional
features. See 'Basic Features'
for further information.
E
PRESSURE (Model P6000, Model TIVA,
Model TCI &TIVA). Press to
display the pumping pressure
and alarm level.
F
PRESSURE
(Model P7000 only). Press to
display the pumping pressure
and alarm level.
A
ON/OFF Press once to switch the pump
ON. Press and hold down for
3 seconds to switch the pump
OFF.
Note: Mark I pumps have a
mechanical ON/OFF switch on
the side of the pump.
J
24H LOG (Mark 1: Model P6000, Model
TIVA, Model P7000). Press to
display the 24 hour log of
volume infused.