CareFusion IVAC P6000, Техническое и сервисное руководство

Страница: 10 / 106

Introduction and Start Up
P7000, P6000, TIVA, TCI & TIVA 10/106 1000SM00012 Issue 8
Pressure Level Press the
E
button (On Model P7000, press the
F
button). Line pressure occlusion alarm level
and current pressure level are shown on a graph. Use the M keys to adjust alarm level.
Purge/Bolus Press the
G
button. If required, use the M buttons to set bolus dose required then press
and hold down the two
PURGE/BOLUS
softkeys together to deliver.
During PURGE/BOLUS, the pressure limit alarms are temporarily increased to maximum levels.
24 Hour Log Press the
J
button. The 24 hour log of volume infused is shown. 24 Hour Log is also available
via the
D
button.
Option Button Press the
D
button to display optional features:
DRUGS AND DOSING (or DRUG
NAME)
Allows the pump to be set up for use with a specific
drug and/or dosing protocol. Follow Drugs and Dosing
instructions as per relevant DFU.
SET VTBI* Set a specific volume to be infused and set rate at end of
VTBI (not available on Model TCI & TIVA or Model TIVA).
SET VTBI OVER TIME*
Specify a VTBI and delivery time (not available on Model
TCI & TIVA or Model TIVA).
SET BY DOSERATE* Set rate in doserate increments (mg/kg/h). The flow rate
will be calculated from the doserate.
SET BY ml/h* Set rate in flow rate increments (ml/h). The doserate will be
calculated from the flow rate.
CLEAR VOLUME Clear the displayed volume infused.
INDUCTION*
Set an induction volume (P7000 only).
MULTIDOSE* Set multidose volumes (P7000 only).
RATE LOCK* Prevent rate being changed once infusion has started.
24H LOG
Shows volume infused over 24 hours.
EVENT LOG* Displays the event log. Holds up to 800 individual events.
* these options are not displayed/available when feature is disabled.
Note that option names may vary and the Model
TCI & TIVA and Model TIVA pumps have
additional model-specific features. For additional information, refer to the relevant
DFU
.
Basic Features