CareFusion IVAC P6000, Техническое и сервисное руководство

Страница: 28 / 106

Routine Maintenance
P7000, P6000, TIVA, TCI & TIVA 28/106 1000SM00012 Issue 8
Self-Test Procedure (123)
(continued)
Test Display Description/Action
Pumping pressure detection BEAM FORCE : _ . _ _ V Remove the syringe and confirm that the value displayed is within
normal range (± 0.05V). Gently press back on the plunger holder and
watch the value increase.
Pressure disc detection
(P7000 only)
PRESSURE DISC: 0 With an extension set fitted the value should be 0. Without an
extension set the value should be 1.
Pressure sensor test (P7000
only)
PRESSURE: _._ _V Check the values displayed are in approximate range of +0.30V to
+0.60V.
Nursecall NURSECALL: ON Check for audible clicks of the relay.
Comms COMMS _ Self-test, transmit/receive link back check.
DONE - SWITCH OFF The final screen displays DONE - SWITCH OFF. Providing the pump
passed all the tests it can be powered OFF and put back into service.
Note that if the pump fails the test sequence at any stage, it should be
taken out of service and inspected by a qualified service engineer.
Upgrading Software
Equipment required: Software upgrade kit (includes EPROM fitting and removal instructions)
Software Upgrade Kits Available
Syringe Pump Model Part Number
Model P7000 1000SP00530
Model TIVA 1000SP00531
Model TCI & TIVA 1000SP00532
Note: The latest version of software for the Model P6000 syringe pump is 1000SP00529.
Upgrade of the Models P7000, TCI & TIVA and TIVA Syringe Pumps software to V3R2 or greater is mandatory at the
next service.
Perform upgrades by acquiring the software upgrade kits specified in spare parts listings.