CareFusion IVAC P6000, Техническое и сервисное руководство

Страница: 4 / 106

Introduction and Start Up
P7000, P6000, TIVA, TCI & TIVA 4/106 1000SM00012 Issue 8
The IVAC® Syringe Pumps are a range of syringe pumps with features dedicated for use in a variety of areas within a
hospital. The range includes these models:

The IVAC® P6000 Syringe Pump is a syringe pump suitable for critical care and general infusion applications

The IVAC® P7000 Syringe Pump is a variable pressure syringe pump suitable for critical care and general infusion
applications

The IVAC® TIVA Syringe Pump is an anaesthesia syringe pump

The IVAC® TCI & TIVA Syringe Pump is an anaesthesia syringe pump incorporating Diprifusor
Two versions of this range of pumps have been manufactured which can be identified by the type of power on/off
switch:

Mark 1 includes a mechanical power on/off switch on the end of the pump

Mark 2 includes a soft power on/off button
A
on the front panel
Product Familiarity
Ensure that you are fully familiar with the syringe pump by carefully studying the
Directions for Use
(
DFU
) prior to operation
and prior to attempting any repairs or servicing. As part of continuous improvement, product enhancements and
changes are introduced from time to time.
Purpose of this Manual
This Technical Service Manual describes how to set up, test and maintain the following IVAC® Syringe Pump models:
P6000
P7000
TIVA
TCI & TIVA
This manual is intended for use by personnel experienced in medical equipment testing and maintenance procedures .
Conventions Used in this Manual
BOLD Used for pump Display names, access codes, controls and indicators referenced in this manual,
for example,
SERVICE ACCESS
menu, access code
251
,
OK
softkey.
'Single quotes' Used to indicate cross-references made to another section of this manual. For example, see
Chapter 2, 'Configuration and Calibration'.
Italics Used for other documents or manuals. For example, refer to the relevant
Directions for Use (DFU)
for
further information.
Wherever this symbol is shown a Hints & Tips note is found. These notes provide useful advice or
information that may help to perform the task more effectively.
Wherever this symbol is shown a Toolbox note is found. These notes highlight an aspect of test
or maintenance that is important to know about. A typical example is drawing attention to a
software upgrade that you should check has been installed.
Introduction