manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3330 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon imageRUNNER ADVANCE C3330 Series Скачать руководство пользователя страница 61

5. When the screen indicating the completion of restoration is displayed, click [OK], remove the USB flash drive, and

then turn OFF and then ON the Main Power Supply Switch.

CAUTION:

Causes of restoration failure
In the following cases, a message indicating that the restoration has failed and its cause are displayed. Take appropriate
measures.

• No USB flash drive is connected.
• Two or more USB flash drives are connected.
• A secured USB flash drive is connected.
• The USB flash memory contains no TPM key.
• The TPM key on the USB flash memory is not for the target machine.
• The entered password does not match.
• "Initialize All Data/Settings" is executed after backing up the TPM key.
• Flash PCB is faulty.

● Disabling of the Function

CAUTION:

Points to note at disabling the function
To stop the operation of TPM, Initialize All Data/Settings needs to be executed. Since user information on the hard disk is
all initialized at this time, be sure to back up the data before configuring the TPM Setting to "Off".

1. Before deleting the data, back up or export necessary data.

List of Data that is Deleted

• Data saved in Mail Box
• Data saved in the reception tray (Confidential Fax Inbox/Memory RX Inbox)
• Destination information registered in the address book
• The reading mode registered by the send function
• [Favorite Settings] registered by the copy function, file save/usage functions, and the send function
• MEAP applications and license files
• Data saved using MEAP applications
• SMS (Service Management Service) password of MEAP (If the password has been changed, the default password

is restored.)

• User authentication information registered in Settings/Registration > Management Settings > User Management

> Authentication Management

• Unsent documents (documents for which delayed or scheduled transmission settings have been specified)
• Job log information
• Settings specified in Settings/Registration
• Registered forwarding settings
• Key and certificate registered in Settings/Registration > Management Settings > Device Management > Certificate

Settings

2. Technology

49

Содержание imageRUNNER ADVANCE C3330 Series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды