manualshive.com logo in svg

Canon imageRUNNER ADVANCE C3330 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon imageRUNNER ADVANCE C3330 Series Скачать руководство пользователя страница 2

Introduction

Important Notices

 Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and repair
of products.
This manual covers all localities where the products are sold. For this reason, there may be information in this manual that does
not apply to your locality.

 Corrections

This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products.
When changes occur in applicable products or in the contents of this manual, Canon will release technical information as the
need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new
edition of this manual.

The following paragraph does not apply to any countries where such provisions are inconsistent with local law.

 Trademarks

The product names and company names used in this manual are the registered trademarks of the individual companies.

 Copyright

This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied, reproduced or
translated into another language, in whole or in part, without the consent of Canon Inc.
Copyright CANON INC. 2015

 Caution

Use of this manual should be strictly supervised to avoid disclosure of confidential information.

 Explanation of Symbols

The following symbols are used throughout this Service Manual.

Symbols

Explanation

Symbols

Explanation

Check.

1x

Remove the claw.

Check visually.

1x

Insert the claw.

Check a sound.

Push the part.

Introduction

Содержание imageRUNNER ADVANCE C3330 Series










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды