Campbell CPEC300, Руководство по эксплуатации продукта

Страница: 148 / 175

Appendix H. Output Variables
H-5
TABLE H-2. Values stored in table flux
Compile
Switch Variable Name Units Description
source_tmpr_Avg ºC Average source temperature
pump_ON_Avg Fraction of time the pump was on
pump_flow_Avg LPM Average pump flow
pump_control_Avg Average pump control value
pump_press_Avg kPa Average pump pressure
diag_CPEC_Avg Average of diag_cpec
fast_samples Number of samples included in the averages for
values measured in the main scan
buff_depth_Max Maximum buffer depth during the output interval
process_time_Avg µsec Average processing time
PumpTmprOK_Avg Fraction of time the pump temperature was within
its operating range
pump_tmpr_Avg ºC Average pump temperature
pump_heat_Avg Fraction of time the pump heater was on
pump_fan_Avg Fraction of time the pump fan was on
panel_tmpr_Avg ºC Average datalogger wiring panel temperature
BattVolt_Avg V Average supply voltage
BattVoltOK_Avg Fraction of time the system was not shut down
because the supply temperature had dropped below
the limit
slow_samples Number of samples included in the average for
values Measured in the slow scan
V ValveTmprOK_Avg Fraction of time the valve module temperature was
within its operating range
V valve_tmpr_Avg ºC Average valve module temperature
V valve_heat_Avg Fraction of time the valve module heater was on
V valve_fan_Avg Fraction of time the valve module fan was on
V, S scrub_press_Avg kPa average pressure at the scrub pump outlet
V, S ScrubTmprOK_Avg Fraction of time the scrub module temperature was
within its operating range
V, S scrub_tmpr_Avg ºC Average scrub module temperature
V, S scrub_heat_Avg Fraction of time the scrub module heater was on
V, S scrub_fan_Avg Fraction of time the scrub module fan was on
LWS leaf_wetness_Avg Average leaf wetness sensor reading
LWS intake_heater_Avg V Average intake heater voltage
zero_span
The zero_span table contains data from the automated zero/span sequences.
Records are written to this table when the calibration sequence is run (either
automatically initiated based on time, or manually initiated). Each zero/span
sequence will put multiple records in the zero_span table, corresponding to the
steps in the sequence. The actual number of records will depend on which
options are chosen. If a step is skipped, no record will be written to table for
that step.
The records in the zero_span table are distinguished by the first two values:
Sequence_Step (1 to 11) and V alveNumber (0 if no valve is selected, or 1 to
6). Space is allocated on the card for 33,000 records (approximately 200 days