Cambium Networks cnWave 5G Fixed, Руководство по эксплуатации и устранению неисправностей

Страница: 60 / 85

Operational Procedures for BTS 60
Figure 50:
An example of CIR with four priority levels
6. Run the tests and record the results.
Verify that the CPE throughputs are as expected for each bandwidth (all sample results
summarized in
Table 3 for reference). The test can be repeated with more than one CPE, if needed.
Table 3: A sample of eighth Scenario Results – CIR (with MIR)
Active Radio Test Set up in Radius Microtik or else
Reading (DL
Mbps) LCT (Expected )
Reading (DL/UP
Mbps)
POP_0 CPE 1
MIR DL Burst Rate = 250
Mbps
DL Limit Max = 350 Mbps
250 Mbps
POP_0 CPE 1
CIR LPDLCIR = 50 Mbps
MPDLCIR = 70 Mbps
HPDLCIR= 90 Mbps
UHPDLCIR = 150 Mbps
(Refer to the Radius
Configuration in the
cnWave™ 5G Fixed
Configuration Guide)
Verify the iperf
results and check
limits of each priority
in line with what is set
and the MIR limit.