Cambium Networks cnWave 5G Fixed, Руководство по эксплуатации и устранению неисправностей

Страница: 34 / 85

Operational Procedures for BTS 34
Figure 23:
BTS Network parameters in the System page
3. Click Save, as shown in Figure 23 .
The changes are effective, immediately, with no impact on the operation of the system. However,
any change made to the Network Configuration-specific parameters affects the management of
the system. The administrator must ensure that the IP address is compatible with the network and
is accessible using SNMP or web UI.
Modifying BTS user accounts – No reboot required
The Systems page in the B1000 UI allows you to modify the user account specific parameters with no
reboot of the system required.
Perform the following steps to modify the user account specific parameters:
1. From the main B1000 dashboard page, navigate to System > Management.
The Management page appears.
For information on how to log on to the B1000 UI, refer to the Accessing the B1000 UI section.
2. In the User Accounts section, add or remove user accounts and set up a role (guest or
administrator) for each user account, as shown in Figure 24 .
You can also select the SNMP Enabled check box if the user needs to enable it for managing the
system using SNMP.