Cambium Networks cnWave 5G Fixed, Руководство по эксплуатации и устранению неисправностей

Страница: 40 / 85

Operational Procedures for BTS 40
Figure 29:
Link capacity test with MUMIMO enabled
For more information about each parameter in the Link Capacity Test page, refer to the cnWave™ 5G
Fixed Configuration Guide.
Linux setup - iPerf server
Testing the MUMIMO performance on a Linux setup using the iPerf server is an alternative method.
Perform the following steps to test the MUMIMO performance in a lab environment:
1. On each CPE c4000, set up an iPerf server:
iperf3 –s
2. On the BTS c4000, run a script that sets concurrent iperf clients to the CPEs (in this case 8
streams, as described about eight CPEs in the previous section).
Figure 30 is an example of running the iperf flood traffic scripts from BTS to all CPEs,
simultaneously.