Operational Procedures for BTS
33
2. On the left navigation column, click the System icon (
).
The System page appears with multiple tabs, as shown in
Figure 22
.
3. Modify the values of System Name, System Location, and System Contact, as shown in
Figure 22
.
Figure 22:
The System page - B1000 UI
4. Click Save, as shown in
Figure 22
.
The changes are effective, immediately, with no impact on the operation of the system.
For more information about each parameter in the System page, refer to the
cnWave™ 5G Fixed
Configuration Guide.
Modifying BTS network parameters – No reboot required
The Systems page in the B1000 UI allows you to modify the network-specific parameters for a BTS with
no reboot of the system required.
Perform the following steps to modify the parameters specific to the network:
1. From the main B1000 dashboard page, navigate to System > General.
The General page appears (as shown in
Figure 7
).
For information on how to log on to the B1000 UI, refer to the
Accessing the B1000 UI
section.
2. In the Network Configuration section, modify the values of parameters such as IP address,
gateways, and DNS (as shown in
Figure 23
).
Содержание cnWave 5G Fixed
Страница 1: ...OPERATION AND TROUBLESHOOTING GUIDE cnWave 5G Fixed System Release 3 0...
Страница 64: ......
Страница 75: ...General Troubleshooting Procedures 75 Figure 57 BTS Data cable troubleshooting Part 2...
Страница 78: ...General Troubleshooting Procedures 78 Figure 59 BTS Data cable Resistance checking...
